Methods for isolating concrete surfaces

در این تالار ، در خصوص مقایسه ی خدمات بانکهای مختلف کشور تبادل نظر می کنیم.

Methods for isolating concrete surfaces

پستتوسط merehan » سه شنبه اسفند 8, 01 1:23 am

concrete surfaces
Concrete is a material consisting of cement, water, sand, and gravel, and it is the basic layer that is placed and used in construction, especially the external surfaces. There is no doubt that homes or facilities are exposed to heat and rainwater, and it is one of the most weather factors that affect concrete surfaces, and for this reason many people resort to using There are some ways to isolate these surfaces to avoid water leakage into the interior concrete parts, which causes moisture, and then the appearance of mold on the ceiling from the inside, as well as to avoid extreme cold and extreme heat during the winter and summer seasons.

Surface insulation from heat
There is no doubt that the concrete material absorbs heat, so there are many materials that have been manufactured to be used in thermal insulation, and among these materials that are widely used:

Rock wool: It is either in the form of slabs that are attached to the surface, or by means of mosaic tiles that contain a large percentage of rock wool.

Perlite material: It is a multi-faceted mineral material that is financially expensive, and it is one of the materials used for thermal insulation, as this material is spread on the surface in special ways, or it is placed with concrete, as this material works to reflect heat, and it also acts as an insulating material for audio.

Surface insulation from moisture
The roof may not be devoid of cracks through which water seeps into the ceiling, causing moisture, which is one of the most common problems that homes suffer from. Some methods of waterproofing roofs:

Bitumen sheets: They are sheets that contain bitumen, as these sheets are fixed by gas heat, and this material works to prevent water leakage from roofs.
Water glass: It is a material that is dissolved in water and used by a spray gun, as it is sprayed directly on the surface.

Silica material: It is one of the strong materials in insulation, as it is mixed in cement to be a basic material in concrete, as silica granules work to strengthen the particles of the cement mixture.
Rock wool: It also enters waterproofing when it is poured with a concrete layer.

Paraffin: It is used as water glass.
Layers of polystyrene or cork: It is one of the modern methods of insulation, and it consists of blocks that are stacked well on the surface, then a cement layer is placed on top of it, and it is a good method used in sound insulation.
Asphalt: It is one of the common methods of insulation, where an asphalt material is brought that is sold in barrels and heated and melted.

تسربات المياه بالقصيم
شركة كشف تسربات المياه بالقصيم
شركة عزل اسطح بالقصيم
پست ها : 40
تاريخ عضويت: دوشنبه دی 11, 01 12:23 am

بازگشت به مقایسه بانک های کشور

چه کسي حاضر است ؟

کاربران حاضر در اين انجمن: بدون كاربران آنلاين و 1 مهمان